Bathroom Renovations in Fawkner
Fawkner sits in the middle of Melbourne's most consistent 1950s and 1960s cream-brick belt. Bathrooms here are almost universally original or lightly patched — coloured 4×4 wall tiles, mismatched taps, and skinny separate WCs behind the kitchen. The bones of these homes are excellent (solid double-brick, concrete slab or heavy timber floors), so most of our Fawkner work turns a tired 5m² bathroom into a well-designed 6.5m² one by absorbing the WC or laundry.
Bathroom styles for Fawkner homes.
Design directions and material palettes to inspire your renovation — not completed projects.
Why homeowners in Fawkner choose Vision Line
Owners in Fawkner want a bathroom that lifts the whole home without the inner-north price tag. Our fixed-price Complete Package sits well within the typical Fawkner budget while still using porcelain tiles, semi-frameless screens, and licensed trades.
- Fixed-price contract, no surprise variations
- Licensed plumber and electrician on every job
- Waterproofing certificate provided on completion
- Workmanship warranty confirmed in writing
- Fully insured — public liability cover in place
- Photographic waterproofing sign-off before tiling
Renovating Fawkner homes
Most Fawkner homes have concrete slabs, which simplifies waterproofing but can make new drainage lines expensive. We assess slab thickness at quote stage so any core-drilling for new floor wastes is factored into the fixed price.
- 1950s cream-brick homes
- 1960s double-brick homes
- Post-war weatherboards
- Newer townhouse infill
- WC absorbed into main bathroom
- Combined bathroom + laundry
- Walk-in shower replacing built-in bath
- 600×1200 stone-look porcelain
- Matt white subway
- Warm concrete-look floors
Ranges below are indicative and depend on layout changes, tile selection and tapware. Your written quote is fixed before any demolition starts.
- Most main bathrooms run about 3–4 weeks on site
- Ensuites are typically a little shorter
- Written quote after your on-site inspection
Four phases. Twelve stages. Same order, every job.
- 01
Planning
Inspection, design, selections, fixed written quote
- 02
Construction preparation
Site protection, demolition, plumbing and electrical rough-in
- 03
Waterproofing & finishes
Substrate, screed, waterproofing, tiling, joinery and fit-off
- 04
Handover
Detail clean, compliance paperwork, walk-through with you
Built for how Fawkner homes actually live.
Every material we specify has to earn its place three ways: it has to look right in the home, hold up under Melbourne water conditions, and still be maintainable ten years from now — not just at handover.
- Tiles
P3/P4-rated porcelain on floors and shower zones (slip-safe when wet). Natural stone reserved for feature walls to avoid ongoing sealing.
- Grout
Waterproof epoxy grout in wet zones — no cracking, no mould regrowth and no re-grouting.
- Tapware
WELS-rated tapware. Brushed brass and gunmetal finishes are PVD-coated (not electroplated) to survive Melbourne water hardness.
- Joinery
Moisture-resistant board substrate on every vanity carcass — not standard MDF, which swells in a wet-area cabinet within four years.
Everything under one contract
Frequently asked in Fawkner.
Can you combine the old WC and bathroom into one room?
Yes — this is one of the most common Fawkner renovations. It usually adds around 1.5m² to the bathroom footprint and delivers space for a proper walk-in shower and vanity.
Is a slab home more expensive to renovate?
Not usually. Slabs are ideal for waterproofing. The only extra cost is if new floor wastes need to be core-drilled through the slab — we identify that at the site visit, not as a surprise later.
Do you provide fixed pricing?
Yes. Every quote we issue is fixed in writing before demolition begins, including tiles, tapware, waterproofing, plumbing, electrical and rubbish removal. There are no hourly surprises.
Are your trades licensed and insured?
All plumbing is completed by a licensed Victorian plumber who issues a Certificate of Compliance. All electrical work is completed by an A-Grade electrician who issues an Electrical Safety Certificate. We carry $20M public liability insurance.
How long does a bathroom renovation take?
A standard main bathroom takes three to four weeks on site once demolition starts. Ensuites usually run two and a half to three weeks. Timelines are written into the contract with a start and finish date.
Reading that pays for itself.
- 7 min read
Bathroom Renovation Cost Melbourne 2026 (Real Prices, Trade by Trade)
How much it costs to redo a bathroom in Melbourne in 2026: $18,500–$45,000+ by tier, a trade-by-trade cost breakdown, and what a fair fixed-price quote must include.
- 5 min read
How Long Does a Bathroom Renovation Take? (Real Melbourne Timelines)
Day-by-day Melbourne bathroom renovation timeline, including waterproofing cure times and typical delays.
- 8 min read
AS 3740 Waterproofing Explained — Bathroom Standard in Plain English
AS 3740-2021 in plain English: exactly what must be waterproofed in a bathroom, membrane build-up, hob and threshold details, and how to check a waterproofing certificate is legitimate.
- 6 min read
How to Diagnose a Shower Leak Before You Strip a Tile
Moisture mapping, silicone tests and hob inspection — how to work out where a shower is actually leaking from.
Ready to renovate your Fawkner bathroom?
Free on-site inspection, a fixed written quote, and a start date on the contract.