Bathroom Renovations in Pascoe Vale
Pascoe Vale bathrooms tend to be small, symmetrical, and originally built at the same time as the house — usually 1950s or 1960s. Renovations in this suburb often solve the same three problems at once: a bath most people never use, a shower over the bath that has failed at the sealant, and a vanity that is too shallow to be useful.
Bathroom styles for Pascoe Vale homes.
Design directions and material palettes to inspire your renovation — not completed projects.
Why homeowners in Pascoe Vale choose Vision Line
Pascoe Vale homeowners want practical, hard-wearing renovations designed for families. We recommend porcelain (not real stone) in main bathrooms here, matt finishes on floors for slip resistance, and full-height wall waterproofing in shower zones — not just the code-minimum 1800mm.
- Fixed-price contract, no surprise variations
- Licensed plumber and electrician on every job
- Waterproofing certificate provided on completion
- Workmanship warranty confirmed in writing
- Fully insured — public liability cover in place
- Photographic waterproofing sign-off before tiling
Renovating Pascoe Vale homes
Merri-bek waste collection restricts front-verge skip placement — we use enclosed trailers and remove waste daily so nothing sits on the nature strip.
- 1950s cream-brick homes
- 1960s double-brick homes
- Post-war weatherboards
- New townhouses on subdivided blocks
- Walk-in shower replaces bath
- Powder room added off entry
- Ensuite carved from master
- Matt white large-format
- Concrete-look porcelain floors
- Vertical stack-bond feature walls
Ranges below are indicative and depend on layout changes, tile selection and tapware. Your written quote is fixed before any demolition starts.
- Most main bathrooms run about 3–4 weeks on site
- Ensuites are typically a little shorter
- Written quote after your on-site inspection
Four phases. Twelve stages. Same order, every job.
- 01
Planning
Inspection, design, selections, fixed written quote
- 02
Construction preparation
Site protection, demolition, plumbing and electrical rough-in
- 03
Waterproofing & finishes
Substrate, screed, waterproofing, tiling, joinery and fit-off
- 04
Handover
Detail clean, compliance paperwork, walk-through with you
Built for how Pascoe Vale homes actually live.
Every material we specify has to earn its place three ways: it has to look right in the home, hold up under Melbourne water conditions, and still be maintainable ten years from now — not just at handover.
- Tiles
P3/P4-rated porcelain on floors and shower zones (slip-safe when wet). Natural stone reserved for feature walls to avoid ongoing sealing.
- Grout
Waterproof epoxy grout in wet zones — no cracking, no mould regrowth and no re-grouting.
- Tapware
WELS-rated tapware. Brushed brass and gunmetal finishes are PVD-coated (not electroplated) to survive Melbourne water hardness.
- Joinery
Moisture-resistant board substrate on every vanity carcass — not standard MDF, which swells in a wet-area cabinet within four years.
Everything under one contract
Frequently asked in Pascoe Vale.
Do we need to keep the bath for resale value?
In family suburbs like Pascoe Vale we usually recommend one bath somewhere in the house. If you have a second bathroom or the family is past the toddler stage, removing the main-bathroom bath for a large walk-in shower is very common.
Can you match the finishes to the rest of the house?
Yes — we look at door hardware, existing skirtings and cornices, and floor colours before recommending a tile and tapware palette that reads as belonging to the same home.
Do you provide fixed pricing?
Yes. Every quote we issue is fixed in writing before demolition begins, including tiles, tapware, waterproofing, plumbing, electrical and rubbish removal. There are no hourly surprises.
Are your trades licensed and insured?
All plumbing is completed by a licensed Victorian plumber who issues a Certificate of Compliance. All electrical work is completed by an A-Grade electrician who issues an Electrical Safety Certificate. We carry $20M public liability insurance.
How long does a bathroom renovation take?
A standard main bathroom takes three to four weeks on site once demolition starts. Ensuites usually run two and a half to three weeks. Timelines are written into the contract with a start and finish date.
Reading that pays for itself.
- 7 min read
Bathroom Renovation Cost Melbourne 2026 (Real Prices, Trade by Trade)
How much it costs to redo a bathroom in Melbourne in 2026: $18,500–$45,000+ by tier, a trade-by-trade cost breakdown, and what a fair fixed-price quote must include.
- 5 min read
How Long Does a Bathroom Renovation Take? (Real Melbourne Timelines)
Day-by-day Melbourne bathroom renovation timeline, including waterproofing cure times and typical delays.
- 8 min read
AS 3740 Waterproofing Explained — Bathroom Standard in Plain English
AS 3740-2021 in plain English: exactly what must be waterproofed in a bathroom, membrane build-up, hob and threshold details, and how to check a waterproofing certificate is legitimate.
- 6 min read
How to Diagnose a Shower Leak Before You Strip a Tile
Moisture mapping, silicone tests and hob inspection — how to work out where a shower is actually leaking from.
Ready to renovate your Pascoe Vale bathroom?
Free on-site inspection, a fixed written quote, and a start date on the contract.